Oxygen Safe Green Color Thread Sealant Tape

 

Oxygen safe green color thread sealant tape is recommended for all oxygen lines. It is extruded with the aid of a petroleum based solvent. This solvent poses no problem if the tape is used on lines carrying potable water or most gases but it is combustible when exposed to pure oxygen, it is free of residue solvent during the manufacturing process.

Furthermore, oxygen safe green color thread sealant tape is manufactured to the maximum possible density. Therefore, it is effective to very high pressures.

 

 

Width	12mm (1/2")
Thickness	0.1mm
Length	13.2m
Density	1.5g/cm3
Tape color	Green
Spool	56mm OD, 25mm ID
Packing	Option A: 10pcs/shrink, 250pcs/box, 1000pcs/ctn Option B: 10pcs/shrink, 100pcs/box, 1000pcs/ctn Option C: 10pcs/box, 1000pcs/ctn (Packing cost A < B < C) Other customized packing allowed.
MOQ	20000 pcs
Delivery time	30-40 days after getting your prepayment

 

 

Composition	Min. 99% virgin PTFE, Max. 1% pigment
Pressure Rating	up to 10,000PSI
Temp.Range	-268C to +260C
Tensile Strength	15 N/mm2
Elongation	Min 50%
Storage	Unlimited shelf life(less than 70F )/50% relative humidity out of direct sunlight
Flammability	Non-flammable

 

 

 

 

 

 

 

Customer: How to Choose the color of Teflon tape made for the type of pipe you’re sealing?

Foreverseal: If you’re sealing standard water lines, then pick the general-use white tape or pink plumber’s tape for the job. If you're working on a gas line, stick with yellow Teflon tape since it’s thicker and creates a better seal. If you’re working on an oxygen line, then stick with green tape since it’s grease-free.

 

Customer: What is the maximum pipe size you can use thread tape on?

Foreverseal: There are no limitations on the diameter of the pipe. You should always wrap the tape enough times around the male threads in order to fill the spigot (female threads). Any pipe sizes over 1¼” with pressure and fluids moving through it should have the male threads wrapped with tape and then the approved pipe joint compound spread over the tape.

 

Customer: What’s the common size for water pipe sealing?

Foreverseal: We normally suggest you take 12mm*0.075mm*10m*0.4g/cm3